DescriptionThis CEE 16A to powerCON TRUE1 converter cable is a short, professional fly-lead designed to adapt a standard 230V 16A blue CEE power outlet to the Neutrik powerCON TRUE1 power system. Built using genuine connectors and 33cm of Titanex H07RN-F 2.5 mm² cable, it provides a robust, reliable interface for stage, event, broadcast and temporary power environments.The compact fly-lead format keeps transition points close to the outlet, reducing strain, trip hazards and unnecessary cable runs while maintaining full electrical integrity at 16A continuous load.What This Converter DoesThis adapter converts a CEE 230V 16A power source into a powerCON TRUE1 output, allowing modern TRUE1-equipped equipment to be powered directly from widely available CEE infrastructure.Unlike improvised adapters, this cable uses the correct conductor size, certified connectors and a locking TRUE1 interface that resists accidental disconnection under load.Connector & Cable ConstructionInput: Blue CEE 16A 230V plug (IEC 60309)Output: Neutrik powerCON TRUE1 socket (Power Out)Cable: Titanex H07RN-F 3G 2.5 mm² rubber cableLength: Approx. 33 cm fly-leadColour: BlackRated current: 16A @ 230V ACTitanex H07RN-F is a heavy-duty rubber cable designed for mechanical resilience, abrasion resistance and dependable performance in demanding temporary installations.powerCON TRUE1 – Why It’s UsedThe powerCON TRUE1 system is widely adopted in professional environments because it combines a locking connector with breaking capacity, allowing safe connection and disconnection under load.When mated, the TRUE1 interface provides IP65/IP67 environmental protection, making it suitable for outdoor stages, covered events and adverse conditions where standard IEC connectors are unsuitable.Typical Use CasesPowering stage and event equipment from CEE distro outputsTemporary power distribution at festivals and live eventsBroadcast, AV and touring rigs using TRUE1-equipped devicesSite power interfaces where compact, secure transitions are requiredThis fly-lead is commonly paired with longer TRUE1 extension cables or distribution systems to create clean, professional power layouts.Important Technical NotesThis is a passive adapter cable. It does not regulate current, provide RCD protection or alter the characteristics of the upstream supply. The connected load must remain within the limits of the supplying CEE circuit.For additional protection, consider pairing this adapter with an inline RCD or RCBO protection device.Why Choose MotorCablesProfessionally assembled and electrically checkedCorrect conductor sizing — no undersized coresGenuine connector systems, not look-alikesBuilt for real-world event and site power useFrequently Asked QuestionsCan this cable convert a CEE 16A socket to powerCON TRUE1 safely?Yes. This fly-lead is designed specifically to adapt a 230V 16A CEE outlet to a powerCON TRUE1 interface when used within the rated limits of the supply.Is this suitable for outdoor use?When the TRUE1 connector is mated, the interface provides IP-rated protection. The Titanex rubber cable is also suitable for outdoor and temporary installations.Does this cable provide RCD or overload protection?No. This is a passive adapter cable and relies on upstream protection from the supply or distribution equipment.Prime HDi and MotorCables are trading names of HDIUK Limited. Registered in the United Kingdom.
English