Mercury 10kVA Online UPS HP9100C-S UPS, Single PhaseThe Mercury 10kVA Online UPS (Uninteruptible Power Supply) has power rating of 7000W which can support a significant number of equipment, providing the power backup needed by such sensitive equipment. The Mercury Online UPS range is ideal for mission critical IT equipment like servers, network systems, workstations, PCs, etc. Because they deliver clean quality pure sine wave power, you have reliable power quality to support your sensitive IT equipment.The online UPS ensures that zero tolerance for any break in power supply, which is imperative for highly sensitive applications, is what you get. With zero switching time, your equipment is kept supplied and running, without service disruptions, at power failure from the grid.And for that perfect balance between top performance, reliability, and budget-friendly pricing, this UPS (Uninterruptible Power Supply) power back-up range has an outstanding rating. Mercury online UPS systems have continued to support mission-critical equipment in many organizations in Kenya. With trusted technical support across Nigeria, available from service workshops in Lagos, Port Harcourt, Abuja, etc, you can be sure that your Mercury UPS will deliver the expected uptime.The rated capacity of the 10kVA Mercury Online UPS, which is 7000W, can support multiple office devices. The estimated backup time at half-load is 13 minutes, and that comes down to about 5 minutes backup at full load, with possible extension, optionally.The Mercury 10kVA Online UPS is powered by 20 x 8.2AH / 12V internal battery pack. You can extend backup with the optional extension battery pack.MERCURY 10KVA ONLINE UPS FEATURES:The advanced design of the Mercury online UPS range gives them the performance edge that you expect. Here’s more on the features you will expect from the Mercury 10kVA Online UPS: Application: Small network, servers and other IT equipmentHigh frequency and double conversion on-line technologyFully digitized microprocessor controlWide input voltage rangeUPS startup without batteryCold startAdvanced battery managementAdvanced battery charge in UPS off modeLightning and surge protectionShort circuit and surge protectionFan speed auto control when loads variesOptional extension battery packLoad capacity displaySmart RS232 communication with monitoring softwareOptional SNMP Card slotSPECIFICATIONS OF MERCURY 10KVA UPS HP9100C-SHere are the specs: Power10kVA / 7000WVoltage range176 ±5VAC~276 ±5VACFrequency46~54Hz ±0.5Hz, or 56~64Hz ±0.5Hz auto sensingInput phaseSingle phasePower factor≥0.98Voltage range220VAC ±1%Output phaseSingle phaseFrequency50Hz ±0.2% (battery mode)THD< 2% (Linear load); < 6% (non-Linear load)Overload105%~130% 10min turn to Bypass mode,> 130% 1s turn to Bypass modeCrest factor3:1 (max)WaveformPure sine waveTransfer time0ms (AC mode – Battery mode)0ms (AC mode – Bypass mode)Efficiency≥88%AC mode5 cycles turn off inverter, no transfer to Bypass, provide alarm.Battery mode5 cycles turn off inverter, provide alarm.Bypass modeInput fuse blown or break action.Battery Model12V sealed lead acid maintenance freeDC voltage240VDCConfiguration20 x 12V/8.2AHBackup time13min (half load) / 5min (full load)Charge current1A (standard unit) / 5A (long time unit)Recharge time90% capacity after 8hrs chargingCommunication InterfaceRS232; SNMP (optional)Parallel PortParallel availability for redundancy and load sharing up to three unitLCD IndicationInput voltage/frequency; battery voltage; output voltage/frequency; load watt/VA value & percent; inverter temperature; operation mode such as “on batt” or “on bypass”LED IndicationGreen: normal operation; Yellow: warning conditionRed: abnormal operationNoise level≤ 55dBTemperature0~40˚C; 0 ~ 40˚C (storage temperature)Humidity0~95% (non-condensing)Altitude< 1500mWeight Net/Gross92/107kg (standard unit); 36/51kg (long time unit)Dimension (WxDxH)270 x 570 x 720mmPackaging (WxDxH)370 x 670 x 940mm
English