Arducam 5MP OV5647 Camera Board with LS-40180 Fisheye Lens M12x0.5 Mount for Raspberry Pi

Arducam OV5647 Camera Board with LS-40180 Fisheye Lens M12x0.5 Mount is a custom designed add-on for Raspberry Pi. It attaches to Raspberry Pi by way of one of the two small sockets on the board’s upper surface. This interface uses the dedicated CSI interface, which was designed especially for interfacing to cameras. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data. The camera is connected to the BCM2835 processor on the Pi via the CSI bus, a higher bandwidth link that carries pixel data from the camera back to the processor. This bus travels along the ribbon cable that attaches the camera board to the Pi.SpecificationsOperating Voltage (VDC)3.3 ~ 5Lense Viewing Angle (FOV)56Resolution5 MPPixel Resolution2592 x 1944Focal Length (mm)4-JanLength (mm)36Width (mm)36Weight (gm)30Shipment Weight0.033 kgFeatures:Lens holder: M12x0.55MPixel sensorIntegral IR filterMax frame rate: 30fpsConnection by a flat ribbon cable to 15-pin MIPI Camera Serial Interface (CSI) connector S5 on Raspberry Pi computer boardThe Camera Lens for Raspberry Pi Camera Board is HX-27227OmniVision 5647 sensor in a fixed-focus module with replaceable LensePackage Includes:1 x Arducam 5MP OV5647 Camera Board with LS-40180 Fisheye Lens M12x0.5 Mount for Raspberry Pi