DescriptionE-SCN-1000: Professional switching power supply 13.8 Volt with Fan 1000W (75A). For larger calibers of Power Amplifiers (RM KL 703 / HLA-300V HP) etc. Ultra compact, self-protected.Features:AC input range by ON / OFF switch1000W Single output with parallel function105℃ output capacitor100% full-load burning testInstalled with EMI filter, minimum waveEquipped with high-quality componentsVery quietEquipped with high-efficiency filters and EMC circuitProtective measures: short circuit / overload current and voltage / overtemperatureHigh reliability: low ripple / low noiseBuilt-in remote sensing functionBuilt-in ON-OFF remote controlBuilt-in parallel operation functionAdjustable output voltage by external control 1-5V from (20 ~ 100%)Adjustable output voltage via internal trimmer (12-14.5 VDC)Forced air cooling through built-in DC fanSpecifications:Model E-SCN-1000DC output voltage: 13.8VDC output power: 1000WRated output current: 75AOutput current range: 0-75ARipple and noise: 240mVp-pVoltage tolerance: 1%Voltage adjustment range: 5.0% typical adjustment by potentiometer 20 ~ 100%Setting by external: 1 ~ 5VDC controlInlet stability: 0.5% Voltage tolerance 1% DC output power 1000WEffectiveness: 84.00%AC input voltage range: 90 ~ 130VAC / 180 ~ 260VAC selected by switch, 260 ~ 370VDCInput current fuse: 10A / 230VAC – fuse 15A / 115VAC AC inrush currentCold start current: 60A / 230VAC Leakage current 3.5 mA / 240VACOverload protection: 110~135% rated output power, Current limiting, delay shut down o/p voltage, re-power on to recoverOver voltage protection: 110 ~ 135% follow to output set up point, shut down o/p voltage, re-power on to recoverHigh temperature: >100℃ / measure by heat sink, near transformer, Shut down o/p voltage, re-power on to recoverTemperature coefficient: 0.04% /℃ (0~50℃)Withstand voltage: I/PO/P, I/P-FG:1500VACIsolation resistance: I/PO/P, I/P-FG, 100M Ohms / 500VDC / 25℃/ 70%RHStart, rise, hold time: 800ms, 50ms, 16ms at full loadSpecial functions: DC voltage adj., remote sensing, remote control, parallel operation (refer to terminal instruction manual)EMC Standards: Meet FCC Part 15J Conduction class AWeight: 2.65 kgDimensions: 291 x 132 x 68 mm, weight 2.65 kgNOTE: For safety reasons and to reduce RFI noise we recommend connecting the device to an earthed socket.
English